U Joints
#2
Former Sponsor
Join Date: Jan 2015
Location: Glen Allen, VA
Posts: 283
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
Um, axle grease?
Seriously though, the inside end, no. That goes back into the carrier and will get lubed by the gear oil inside the pumpkin. The end that goes into the hub, I'd use some general purpose grease on the splines to keep it from rusting into the unit bearing. Something like a waterproof moly grease. Any kind is probably fine.
Seriously though, the inside end, no. That goes back into the carrier and will get lubed by the gear oil inside the pumpkin. The end that goes into the hub, I'd use some general purpose grease on the splines to keep it from rusting into the unit bearing. Something like a waterproof moly grease. Any kind is probably fine.
Thread
Thread Starter
Forum
Replies
Last Post
cpnwrench
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
13
02-15-2024 08:09 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)