Bad94Cherokee4x4

I saw Cruzin Illusion write up but there's no way of contacting him about the demension's/spec's of the doors. I bought my 94 for $400 because it ran and drove just fine, but it had no doors and it looks like the guy just opened the doors and ran them againt a tree, so I don't think I could make the factory doors work. So was going to weld/bend tube doors up and really like Cruzin Illusion doors, so im just tring to get demension's and what not, so if someone could help me out, id apperciate it.

Chris

krkx93

i just started making sum. but i didnt really take anymeasurements i just made the first one to fit and then made the second one to match the first. did it all with a grinder a welder and a jig saw. i didnt have a tube bender so i just bought pre bent 90s and cut them to the angles i needed ill take pics and post them tommmrwo

Bad94Cherokee4x4

That's even better, yea I don't have a tube bender but never thought about doing that. Yea id really appercaite it if you could get some picture's, thanks!

bigbadxj

I Make and sell Tube Doors! I will PM you more info or you can E-mail me at bigbadxj@gmail.com for more info and pics.

krkx93

https://www.cherokeeforum.com/member...be-door-build/

the album with the ones i made