True Lift of Lift Springs?
Thread Starter
Junior Member
Joined: Dec 2009
Posts: 64
Likes: 1
From: western new york
Year: 2001
Model: Cherokee
Engine: 4.0 283K
I am considering using the pro comp springs number 53111 however i only want 2.5" rear lift and need new rear springs anyway. numerous parts sites have listed this set of springs anywhere from 2.0" to 4.5" lift? Just dont wanna buy the wrong stuff. just going to use new ZJ front springs instead of spacers since my springs are about dead. so does anyone know if this is the right spring or ones that will fit what im looking for? Thanx again you all have been very helpful so far.
Sorry I can't answer your question cuz i'm not familiar with pro comp springs but I can offer an alternative solution that's less confusing:
Try these:
http://www.jeepinoutfitters.com/scri...idproduct=1184
MUCH better ride quality than most springs out there. They also have a bunch of other springs in different sizes.
http://www.jeepinoutfitters.com/scri...?idCategory=72
Try these:
http://www.jeepinoutfitters.com/scri...idproduct=1184
MUCH better ride quality than most springs out there. They also have a bunch of other springs in different sizes.
http://www.jeepinoutfitters.com/scri...?idCategory=72
Senior Member
Joined: Sep 2008
Posts: 680
Likes: 2
From: Phoenix AZ
Year: 1997
Model: Cherokee
Engine: I6ho
Sorry I can't answer your question cuz i'm not familiar with pro comp springs but I can offer an alternative solution that's less confusing:
Try these:
http://www.jeepinoutfitters.com/scri...idproduct=1184
MUCH better ride quality than most springs out there.
Try these:
http://www.jeepinoutfitters.com/scri...idproduct=1184
MUCH better ride quality than most springs out there.
I've run them for years now with no complaints.
Thread
Thread Starter
Forum
Replies
Last Post
nicksan
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
28
Mar 8, 2016 11:33 AM
JPXJMOAB
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
2
Sep 6, 2015 07:16 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



