Trouble Codes
Hey all. I have a 1998 XJ I just changed the trans in. After installing, it blew a fuse that is in an “Open” spot, (the manual says anyway) but is actually used to control AC. We scanned the computer and got these codes;
P0700 Trans P1491 Trans Control P0545 O2 The thing drives and shifts normal but the AC doesn’t work. In order to try and isolate the problem, I have disconnected the AC fan, pulled the AC relay and pulled the AC and Clutch Fan fuses out of the fuse box in the engine compartment. Turned the AC dash controls off then turned on the key and POP! So then I disconnected the trans harness thinking there’s a short in there or in one of the trans silinoids, turned the key on and POP! can anyone offer any insight as to what I may be dealing with? Thanks. |
What is that fuse labeled as powering?
|
Originally Posted by '90Cherokee
(Post 3433810)
What is that fuse labeled as powering?
|
Pretty odd that it's popping then. Check another manual or online, maybe that manual just has a mistake. Open spots usually have no terminals or just one, but not always. I can't imagine an open spot would have power and a shorted terminal, that seems very suspicious.
|
Originally Posted by '90Cherokee
(Post 3434147)
Pretty odd that it's popping then. Check another manual or online, maybe that manual just has a mistake. Open spots usually have no terminals or just one, but not always. I can't imagine an open spot would have power and a shorted terminal, that seems very suspicious.
|
All times are GMT -5. The time now is 11:34 PM. |
© 2024 MH Sub I, LLC dba Internet Brands