Abram1109

I've cut my front fenders already, no problem. Now I want to trim the rear fenders just above the holes for the flare. If the body separates, can I use a sealant to fill in the gap or will I have to weld?

Thanks in advance

jyaughn

if you use the cut aND fold trick you wont need to use sealent

jyaughn

just cut between the spot welds however far up you want it to go and then just fold the tabs under

jyaughn

https://www.cherokeeforum.com/f51/cut...-fenders-1718/ this helped me out alot when i did mine

Abram1109

Thanks for the help guys. I've been an XJ owner since March of '09 and a member of this forum since November of '09. I do as much work as I can myself. That's 60% of the fun of being an XJ owner. (The other 40% is being able to put your work to the test on the trail of course). I don't have a huge stock of tools. I pretty much buy them as I need them and it's slowly starting to mount up. But this site is by far the best tool in my bag. Since I joined, I post here or search here before attempting anything myself and it has proven to be an excellent decision every time.

Thanks again.

jyaughn

glad i could help