ButtStripe

I'm gonna replace my transmission cooler line that goes to the lower fitting on the radiator (the one with the rubber hose). Do you need to drain the trans to do this job? Looks like just a quick disconnect fitting on the trans and one on the radiator.

Also, anyone have a NAPA part number for this? think it's NOE 8111406 just want to double check.

Also, I've been trying to get a new battery tray but I cant seem to find one. Besides the junk yard, is there any store where I can pick on up?

kyle96xj

DirtBound offroad sells an aftermarket battery tray, I don't think you'll have to drain the transmission just top it off, might be wrong but I doubt it.

cruiser54

No need to drain the trans.

ButtStripe

Thanks for the replies. Any idea what kind of o ring I need for the female end? Doing a little research on the internet people had mentioned needing an o ring.

ButtStripe

Thanks for the replies. Any idea what kind of o ring I need for the female end? Doing a little research on the internet people had mentioned needing an o ring.

cruiser54

I would suspect it's in the end of a new hose. If not:

Fuel disconnects

Quick disconnect part numbers

The Napa part numbers for just o-rings *is:

Napa 730-5018 3/8 Viton individual o-rings
Napa 730-5017 5/16 Viton individual o-rings
Napa CRB 212305 fuel line repair kit 5/16
*Remember to re-use your old spacer between the 2 new o-rings!!

Mopar repair kits:

83502745 fuel line repair kit 5/16
83504447 fuel line/Trans line repair kit 3/8

cruiser54

And, I've got a battery tray for you.

ButtStripe

O rings already in the new guy just had to peek harder. Got it on today in the parking lot of an O'Reilly. No big deal. I'll post the vid here when I get it on the net.

Sweet on the tray brother!

cruiser54

First good tray I've ever gotten on a part-out. Got your name on it.