Jeep Cherokee Forum

Jeep Cherokee Forum (https://www.cherokeeforum.com/)
-   Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here (https://www.cherokeeforum.com/f2/)
-   -   trans mount help (https://www.cherokeeforum.com/f2/trans-mount-help-203556/)

wrapstar Dec 22, 2014 10:35 PM
trans mount help
 
So I had to pull the crossmember out this weekend and bought a trans mount for an 2001 automatic. Now that I have it and compared it to the one I took out there not the same. The one I took out the studs were centered and the new one there off set and it's taller. My question is did I receive the wrong one or did I have the wrong one.

1998blackXJ Dec 22, 2014 10:43 PM
Originally Posted by wrapstar (Post 2998678)
So I had to pull the crossmember out this weekend and bought a trans mount for an 2001 automatic. Now that I have it and compared it to the one I took out there not the same. The one I took out the studs were centered and the new one there off set and it's taller. My question is did I receive the wrong one or did I have the wrong one.
upload pictures???

Rockfrog Dec 23, 2014 10:07 PM
You got. The wrong one, the new one you have is for a pre 99 crossmember.
Easy answer is to aquire a earlier crossmember and swap it and the trans mount in.
Hard answer is take that one back and try to locate a proper mount. I've heard the 4cyl mounts will work.
I went with an new crossmember that uses a GM trans mount I can damn near get at the 7-11.

wrapstar Dec 23, 2014 10:29 PM
It's a long arm crossmember I just ground down the centering pin and installed it today


All times are GMT -5. The time now is 06:10 PM.


© 2026 MH Sub I, LLC dba Internet Brands