importcrusher420

hey, i was wandering about doing a motor swap in my 92 cherokee.
i can get a tpi 350 or a lt1 out of a camaro and was wandering what would be the better motor for it and what i would have to do to the front to accommodate the extra weight and anything else i cant think of that goes along with this swap.

i will be using all advance adapter conversion parts(bell housing,motor mounts and conversion headers) what else might i need for this swap and any info as i have been looking this up for a week with no real good info.



thanks

Abovetimberline

I seen a thread on here where someone did that,but I cannot find it right now,but it is dooable.

XJSETH

you can do it! its easy......yeah right man. good luck for sure tho. when my 4.0 goes or if it goes i will be doing a v8

COSXJFAN

Some of the LT motors are all aluminum, and from what I've heard, are around 100 pounder lighter than the 4.0.

SeriousOffroad

5.3L makes better numbers than the 5.7L.

REWSTER

Google jeepspeed one of them crazy SOB prerunner guys probably has done it

96rhino

the LT1 is far better than the TPI, I've owned both. LT1!!!

Donnie_K

oh man, 4.7 hammerhead stroker all the way, unless you're planning on taking it to the drag strip instead of offroading it.

http://www.jeepstroker.com/index.php...od&productId=2