T-case skid spacer
#1
T-case skid spacer
So i bought a re 3.5" lift and for now I'm going to be doing a t-case drop on it until i can set some more money aside for a sye. I have skids on front as well as gas tank and transfer case. My question is does anyone know any place that sells a spacer for a factory t-case skid plate or has anyone ever fabed one? I would still like to use the skid plate but if i cant no big deal.
#2
CF Veteran
Join Date: Aug 2009
Location: Las Vegas
Posts: 1,263
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996 Limited
Model: Grand Cherokee
Engine: 5.2
I have been thinking this also. I just took mine off when I did the drop due to it hitting my t case. I was just ganna try and use some washers or somthing. Im not sure yet because I wanr it to be strong
#4
Senior Member
Join Date: Aug 2008
Location: Battle Creek, MI
Posts: 847
Likes: 0
Received 2 Likes
on
2 Posts
Year: '92
Model: Cherokee
Engine: 4.0
How much of a drop are you doing?
Find out of much and then head down to your local hardware store and get a chunk square stock that is the same width. Then match your holes and drill them out. You will probably have to get some longer bolts to match.
Another idea, if you have a local fab shop see how much they will charge to make one up. JCR here said they would do one up for around 20 or so.
Find out of much and then head down to your local hardware store and get a chunk square stock that is the same width. Then match your holes and drill them out. You will probably have to get some longer bolts to match.
Another idea, if you have a local fab shop see how much they will charge to make one up. JCR here said they would do one up for around 20 or so.
Thread
Thread Starter
Forum
Replies
Last Post
studmuffin
Cherokee Chat
8
10-05-2015 01:54 PM
Zach Smith
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
11
09-26-2015 03:24 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)