t-case shifter
#1
Seasoned Member
Thread Starter
Join Date: Jul 2009
Location: Benton, KY
Posts: 349
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1986
Model: Cherokee
Engine: 2.8
t-case shifter
ok, so my Xj is missing everything t-case shifter related except the handle itself. i have been thinking about fabbing up my own setup. i pulled the stock handle out of the floor and discovered that the selector on the t-case is almost directly under it. i am thinking about just making a piece to bolt to the t-case selector and run straight up through the hole in the floor. i am concerned about the possibility of the weight of the handle itself moving the selector. i am thinking about making the piece that bolts to the selector steel and the handle itself aluminum to keep the weight of it down.
anyone think this would work?
anyone think this would work?
Thread
Thread Starter
Forum
Replies
Last Post
thanser
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
3
09-15-2015 08:43 PM
CAT_Tech2
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
09-15-2015 08:21 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)