Jeep Cherokee Forum

Jeep Cherokee Forum (https://www.cherokeeforum.com/)
-   Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here (https://www.cherokeeforum.com/f2/)
-   -   t-case (https://www.cherokeeforum.com/f2/t-case-107682/)

tontos14 Oct 9, 2011 06:57 PM

t-case
 
Hey does any one know if a 1998 Jeep Cherokee sport's transfer case will fit into a 1989 Cherokee sport?

Rustydog555 Oct 9, 2011 07:30 PM

Is it the same t case do the jeeps have the same motor, transmission..... More u know the more we know

tontos14 Oct 10, 2011 09:05 PM

Yeah same motor and trany but different year

Rustydog555 Oct 10, 2011 11:29 PM

I'd say ur good to go

gvns8 Oct 10, 2011 11:37 PM

The main concern is the input gear length and spline count matching.

This might help:
http://www.novak-adapt.com/knowledge...nput_gears.htm

Gatchmo5710 Oct 10, 2011 11:59 PM

i just did this swap but with a wrangler. the input shaft was about a inch longer than i needed so i just grinded it down til it fit. now it works great. need help just pm me

cruiser54 Oct 11, 2011 06:47 AM

Spline count on an 89 should be 21 and on the 98 should be 23. No worky.

tontos14 Oct 12, 2011 05:53 AM

OK well could I rebuild the 98 tcase with the 89 spline

Gatchmo5710 Oct 12, 2011 11:06 AM

The only this u would have to switch it the input shaft i believe.

tontos14 Oct 12, 2011 06:15 PM

So if I rebuild the 98 and put the 98 intake shaft it should work

cruiser54 Oct 12, 2011 06:39 PM


Originally Posted by tontos14 (Post 1253517)
So if I rebuild the 98 and put the 98 intake shaft it should work

No. The 98 input shaft is 23 spline. Your 89 is 21.

Gatchmo5710 Oct 12, 2011 07:12 PM


Originally Posted by cruiser54
No. The 98 input shaft is 23 spline. Your 89 is 21.

We get that... so can't he just swap input shaft?

cruiser54 Oct 12, 2011 07:19 PM


Originally Posted by tontos14 (Post 1253517)
So if I rebuild the 98 and put the 98 intake shaft it should work

I responded to this. 98 input shaft won't work.

DFlintstone Oct 12, 2011 07:33 PM

"So if I rebuild the 98 and put the 98 intake shaft it should work"

Did you mean "if I rebuild the 98 and put the 89 intake.....

tontos14 Oct 12, 2011 09:13 PM

No like if I take out the tcase out of the 98 and rebuild it with 89 spline and intake shaft so the spline match up would that work?


All times are GMT -5. The time now is 03:42 AM.


© 2026 MH Sub I, LLC dba Internet Brands