SYE needed on my NP242???
02-04-2010, 10:50 PM
#1
Senior Member
Thread Starter
Join Date: Jan 2010
Location: Westminster Colorado
Posts: 613
Likes: 0
Received 1 Like
on
1 Post
Year: 1991 (2-door)
Model: Cherokee
Engine: 4.0L
SYE needed on my NP242???
I have a 91 Cherokee Laredo with an NP242 T-Case and 5 inches of lift. I have not elminated the slip yoke and have never had any issues. By no means am I complaining, but I have never had any driveline or vibration problems, even when wheeling and I do some pretty hardcore trails. Is there something dif. with the 242 that the SYE is not needed? All my buddies wtih 231's have had to install one cause of the vibration problems. I guess thats why theres no SYE kits for the 242 other than a Hack N Tap???
02-04-2010, 11:02 PM
#2
CF Veteran
Join Date: Jan 2010
Location: Indianola IOWA
Posts: 2,059
Likes: 0
Received 1 Like
on
1 Post
Year: 1992
Model: Cherokee
Engine: 4.0
the reason why the only make a hack and tap is because the new hd out put shaft doesnt fit in the 242. im at 5.5 with a 3/4 t-case drop on my 242 with no vibes. I will be intalling the iro hack and tap shortly though for peace of mind and i am goin a little higher. not harder on u-joint because they are at a more severe angle but ive always got along fine
Thread
Thread Starter
Forum
Replies
Last Post
2000CHERO
Modified XJ Cherokee Tech
20
10-12-2015 11:03 PM
william50
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
08-31-2015 02:19 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)