Strange noise, and I need help!
Have some questions for you guys that know more on jeeps than I do. I have an 87 jeep Cherokee, I barely got it and I have a noise but don't know where it is coming from. At take off its non existent, at speeds from takeoff - 35mph it's not there. At 40-45 the noise is present.
Now I took the rear drive line off with the jeep on stands while accelerating, hoping it would help pinpoint the noise and there is no noise whatsoever. I did notice rear u joint was trashed, so I replaced it and put a new one on, thinking I wouldn't hear the noise anymore. Now reinstalled, but noise is back and same around 40 mph. I've been told its the transfer case but it happens in 2wd, and I'm thinking noise is just traveling up the driveline to where it makes it sound like its under the ebrake handle. Well Im hoping at least.. Anyone care to chime in? People keep telling me transfer case and transfer case this and that but I am hoping not. Might sound dumb but I drove it through grass with rear drive line removed and no noise whatsoever. So is it possibly the ujoint connecting to the yoke? The noise is similar to when you have something stuck to your tire and its flapping. Non existent at take off up to 35-40, then I start hearing it. Its a thud, thud, thud, thud noise. And gets faster as I accelerate. Sort of like I know its a rotating sound, and its there and won't go away, as I drive it settles out but stays. Doesn't fade away, just keeps making the same noise. My question is, why is the sound not present when the rear drive line is removed, but comes back as soon as drive line is present. Is it possibly the transfer case and the only reason it doesn't make the sound, is because there is no load on the tailshaft? Sorry for the long winded post, just trying to figure out my problem and hoping it is not in fact the transfer case in any way. Also, the noise is ONLY present while I am driving in 2wd after 40 mph. Any help is greatly appreciated!! |
Is the front joint on your rear drive shaft stiff or siezed up ? Hows the fluid level in the t-case?
|
Originally Posted by wauto
(Post 3183764)
Is the front joint on your rear drive shaft stiff or siezed up ? Hows the fluid level in the t-case?
|
could be pinion angle (sye, yes or no? is your xj lifted?), could be loose pinion nut at the rear axle. Could be forward ujoint. If it were the transfercase it would be the output bearing to rear axle... everything is turning inside regardless of 2 or 4 wheel drive(except for front drive shaft out put shaft) low fluid level will not cause a dedicated vibration at a fixed speed. How is your transmission mount ?
|
Originally Posted by neverenuff
(Post 3183800)
could be pinion angle (sye, yes or no? is your xj lifted?), could be loose pinion nut at the rear axle. Could be forward ujoint. If it were the transfercase it would be the output bearing to rear axle... everything is turning inside regardless of 2 or 4 wheel drive(except for front drive shaft out put shaft) low fluid level will not cause a dedicated vibration at a fixed speed. How is your transmission mount ?
|
Didn't make the noise when I drive it in 4wd with front wheels only. Noise was gone, so would it be transfer case?
|
Originally Posted by neverenuff
(Post 3183800)
could be pinion angle (sye, yes or no? is your xj lifted?), could be loose pinion nut at the rear axle. Could be forward ujoint. If it were the transfercase it would be the output bearing to rear axle... everything is turning inside regardless of 2 or 4 wheel drive(except for front drive shaft out put shaft) low fluid level will not cause a dedicated vibration at a fixed speed. How is your transmission mount ?
|
No vibration or shaking whatsoever by the way, just sound.
|
Sub'd since I have the same damn noise and haven't found a fix. I put in a new transfer case and its still doing it. My noise is gone with the front drive shaft out. It's really getting frustrating.
|
Originally Posted by Silentj
(Post 3184035)
Sub'd since I have the same damn noise and haven't found a fix. I put in a new transfer case and its still doing it. My noise is gone with the front drive shaft out. It's really getting frustrating.
See last night I took out front drive shaft, and I still have the damn noise. So i was thinking transfer case now or trans. Nothing else connected and it makes the noise. My sound, sounds as if its under the rear of the ebrake handle. Have you replaced any of your u joints? I have one u joint left to replace on the rear driveline. The one that goes to the yoke and shaft. If that doesn't work I'm gonna give up trying lol. |
How are your outer axle joints(on the front end, near the ball joints) ?
|
Originally Posted by wauto
(Post 3184088)
How are your outer axle joints(on the front end, near the ball joints) ?
|
your rear drive shaft has two ujoints one on the slipyoke side and one on the axle side.... you replaced the axle side joint , how is the joint on the slip yoke side? with a 4" lift you should have a slip yoke eliminator installed on your transfercase. How is your pinion angle? is the pinion pointed (within a few degrees) at the transfercase? do you have degree shims installed at the leaf spring perches? the noise could be related to worn out bearings in the tailshaft of your transfercase... is there much movement in the transfercase output shaft (rear axle side)? you stated the transmission mount is fine no cracks or tears in it ?
|
what I said about pinion angle was only correct with a double cardon style drive shaft. If you still have the orginial slip yoke style drive shaft the pinion angle and the output shaft angle on the transfercase must match or be the same within 1 or 2 degrees.Sorry about the mis-information
|
Originally Posted by neverenuff
(Post 3184178)
what I said about pinion angle was only correct with a double cardon style drive shaft. If you still have the orginial slip yoke style drive shaft the pinion angle and the output shaft angle on the transfercase must match or be the same within 1 or 2 degrees.Sorry about the mis-information
|
All times are GMT -5. The time now is 08:16 PM. |
© 2024 MH Sub I, LLC dba Internet Brands