Steering box stablizer
#1
Junior Member
Thread Starter
Join Date: Jul 2009
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1984 and 1999
Model: Cherokee
Engine: 2.8L and 4.0L
Steering box stablizer
I have this steering box stablizer that I picked up from rustys offroad. I have recently read forums where people have experienced too much pressure on the driver side of the frame from the steering box. This stabilizer is supposed to put pressure on both sides preventing the frame from bending. If anyone knows the product I am talking about please give me advice on proper mounting. Thank you any advice is helpful.
#2
CF Veteran
Join Date: May 2008
Location: Bristol,Pa
Posts: 5,188
Likes: 0
Received 6 Likes
on
6 Posts
Year: 94
Model: Cherokee
Engine: 4.0L
No instructions with the brace?
I dont remember if i had to drill the two holes on passenger side frame or not... they may already be there. Basically you want to assemble the steering box side to clamp around the steering box, then bolt it up on the pass side.
Take a look at this pic. It should help visualize.
http://rustysoffroad.com/mm5/merchan...egory_Code=ste
I dont remember if i had to drill the two holes on passenger side frame or not... they may already be there. Basically you want to assemble the steering box side to clamp around the steering box, then bolt it up on the pass side.
Take a look at this pic. It should help visualize.
http://rustysoffroad.com/mm5/merchan...egory_Code=ste
Thread
Thread Starter
Forum
Replies
Last Post
Dyno89
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
09-13-2015 02:23 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)