Single Hole Motorcraft Injector XR3E 9F593 A4B Better then 4 Hole!
I am trying to decide.. I went by what this guys says and got the fords brand new at the local store in a set of 6 for 60.00 bucks?? Or well see if thats true when I get there Thursday! Look at this about injectors: http://www.ausjeepoffroad.com/forum/...ad.php?t=92236
I just bought the Ford Mustang Injectors: XR3E 9F593 A4B which according to these guys on the other forum who sound like experts.. You really have to see this post.. amazing with picks of every injector you can use. They say the ones Im getting are the best and latestes tech for those years and its SINGLE hole.. What do you think? You have to read the link.. I have a 2001 so I need EV6 - 703s wont work since no UCAR.. Do i need clips or whatever? Do I shut the fule rail off or somehting ?? Ill take my time.. the things are brand new! |
Originally Posted by buysellny
(Post 699941)
I am trying to decide.. I went by what this guys says and got the fords brand new at the local store in a set of 6 for 60.00 bucks?? Or well see if thats true when I get there Thursday! Look at this about injectors: http://www.ausjeepoffroad.com/forum/...ad.php?t=92236
I just bought the Ford Mustang Injectors: XR3E 9F593 A4B which according to these guys on the other forum who sound like experts.. You really have to see this post.. amazing with picks of every injector you can use. They say the ones Im getting are the best and latestes tech for those years and its SINGLE hole.. What do you think? You have to read the link.. I have a 2001 so I need EV6 - 703s wont work since no UCAR.. Do i need clips or whatever? Do I shut the fule rail off or somehting ?? Ill take my time.. the things are brand new! |
the reasontoi do the injecto up grade is to get the four hole spras in a finer mist than a single hole fuel burns more in the cyl
|
Yep, presuming 2 injector types (1 hole vs multi-hole) have the same flow rate, the multi-hole injector will have a finer spray mist giving better fuel atomization which improves combustion for less unburned fuel out the tailpipe, etc., etc.
|
The newer type of injectors are built to provide better atomization while still in the housing, without the need for multiple ports. Many people are saying these are better.
|
I just ordered these and hope to install them by this weekend, ill be sure to share how they are..
|
Originally Posted by BlackBetty01
(Post 705138)
I just ordered these and hope to install them by this weekend, ill be sure to share how they are..
|
Originally Posted by Dan91
(Post 705145)
Hey BlackBetty, How do you like your RE lift? It's the same setup I was gonna go with on mine, with 31s. Did you use 9.5 or 10.5 wides?
|
Job Complete 2001 Injector Upgrade Ford XR3E 9F593 A4B
Originally Posted by buysellny
(Post 699941)
I am trying to decide.. I went by what this guys says and got the fords brand new at the local store in a set of 6 for 60.00 bucks?? Or well see if thats true when I get there Thursday! Look at this about injectors: http://www.ausjeepoffroad.com/forum/...ad.php?t=92236
I just bought the Ford Mustang Injectors: XR3E 9F593 A4B which according to these guys on the other forum who sound like experts.. You really have to see this post.. amazing with picks of every injector you can use. They say the ones Im getting are the best and latestes tech for those years and its SINGLE hole.. What do you think? You have to read the link.. I have a 2001 so I need EV6 - 703s wont work since no UCAR.. Do i need clips or whatever? Do I shut the fule rail off or somehting ?? Ill take my time.. the things are brand new! THESE INJECTORS DO NOT USE THE STOCK CLIPNUTS I completed the job in 1.5 hours start to finish. A monkey with a screwdriver and a pliers could do this job. I DID NOT remove the fuel line from the fuel rail. I was able to rotate the rail a bit upward while connected to fuel line and I removed and installed the new injectors. The truck runs smoother at idle. Its quick as all hell but it was before as well since I ran that seafoam crap.. That stuff works man! Anyway, I see very little difference.. At least they work and apparently according to that post at http://www.ausjeepoffroad.com/forum/...ad.php?t=92236 they are the best ones. I can assure you they work for my 2001 without clipnuts and its an easy job!! DO IT!! |
I just installed the Ford: XR3E 9F593 A4B Motorcraft Part Number: CM4956 for my 2001
Originally Posted by buysellny
(Post 699941)
I am trying to decide.. I went by what this guys says and got the fords brand new at the local store in a set of 6 for 60.00 bucks?? Or well see if thats true when I get there Thursday! Look at this about injectors: http://www.ausjeepoffroad.com/forum/...ad.php?t=92236
I just bought the Ford Mustang Injectors: XR3E 9F593 A4B which according to these guys on the other forum who sound like experts.. You really have to see this post.. amazing with picks of every injector you can use. They say the ones Im getting are the best and latest tech for those years and its SINGLE hole.. What do you think? You have to read the link.. I have a 2001 so I need EV6 - 703s wont work since no UCAR.. Do i need clips or whatever? Do I shut the fuel rail off or something ?? Ill take my time.. the things are brand new! for my 2001 Cherokee 4.0L I DID NOT DISCONNECT THE FUEL RAIL FROM THE FULE LINE THESE INJECTORS DO NOT USE THE STOCK CLIPNUTS I completed the job in 1.5 hours start to finish. A monkey with a screwdriver and a pliers could do this job. I DID NOT remove the fuel line from the fuel rail. I was able to rotate the rail a bit upward while connected to fuel line and I removed and installed the new injectors. The truck runs smoother at idle. Its quick as all hell but it was before as well since I ran that seafoam crap.. That stuff works man! Anyway, I see very little difference.. At least they work and apparently according to that post at http://www.ausjeepoffroad.com/forum/...ad.php?t=92236 they are the best ones. I can assure you they work for my 2001 without clipnuts and its an easy job!! DO IT!! You can buy them on the company website as well for 60.00!! Look em up on eBay.. |
Ford xf2e-c4b injectors
|
Originally Posted by rich
(Post 705439)
Ford xf2e-c4b injectors
|
Originally Posted by buysellny
(Post 705315)
I DID NOT REMOVE FUEL RAIL THESE INJECTORS DO NOT USE THE STOCK CLIPNUTS...I completed the job in 1.5 hours start to finish. A monkey with a screwdriver and a pliers could do this job. I DID NOT remove the fuel line from the fuel rail. I was able to rotate the rail a bit upward while connected to fuel line and I removed and installed the new injectors.
|
Originally Posted by buysellny
(Post 705764)
Are those 4 hole? I drove these new ones around all day and im not really impressed.. I wonder why you would use 19# injectors? Isn't that going to create a long term lean condition?
|
Originally Posted by Programbo
(Post 708039)
You HAVE to remove the fuel rail. It's bolted down in place. The new Ford injectors might not use the clipnut but the ones you took off did. 1.5 hours? Oy! I swapped out the 703's I had in my '94 XJ the other day for a fresh set of Ford 710's and it took me 14 minutes and 39 seconds start to finish and I completely removed the fuel rail. :icon_wink: As far as not disconnecting the fuel lines from the rail that would result in a LOT of gas being dumped down the side of your engine when you pull the old injectors out. In any event I would like to hear some updates from those running the new style Ford injectors. Of course if you just go from the stock XJ injectors to the Ford ones you can't really say how they compare performance wise with the Dodge 784's.
I did not have the proper plastic tool to remove the fuel line so.. I just rotated the rail upward.. I never did this before so i take my time.. Now its a 1/2 hour or less for sure.. I am not sure what a 94 looks like but the 2001 does not require removing teh fuel line from the rail.. Why open ope a 10 year old attachement like that if you dont have to.. Less chance of leaks.. However, they are dumping too much fuel.. I think its running rich.. According to COAS you have to run it for a while and 50 starts.. Anyway, I'm not sure how your doing it but IM going to keep swapping injectors, 1/2 hour or less job now that I know how to do it, until I find the ones giving me the most power.. these do not appear to be doing anything better then stock.. I have a lead foot however.. Im going to try the LEANER fords or the Boche 784's next.. I will just resell whatever I dont use till I get the setup I want.. Unfortunatly, I can tell that you have not installed injectors without clipnut in your rig? Or did you before? The clipnuts look useless to me but Im sure they are not!!. The pop right in EITHER way.. Clipnuts are to hold them straight in place.. That said, I also was not comfortable with that idea but no leaks and runs great.. I think in 2001 the stock injectors kick *** to begin with.. I feel less power so far and worse gas mileage.. Looks like I have to run it a while. Ill keep trying.. Im going to run those leaner fords next.. 19#.. However, Im afraid they will screw up the truck.. Boche 784 is my other choice.. I agree on the clipnuts not being used as a potential problem.. However, the injectors were recommended in that Aussi post by COAS and Rainman.. I was surprised clipnuts did not fit on them.. That would have been useful in that post.. What do you think next Boche 784's or the Fords 19# on that list Ford xf2e-c4b injectors Im not that happy with these I put in really.. I wonder why they were 60 bucks new!!! |
All times are GMT -5. The time now is 05:52 PM. |
© 2024 MH Sub I, LLC dba Internet Brands