shifting issue resolved??
#1
Senior Member
Thread Starter
Join Date: Jun 2014
Location: Eagle River, Alaska
Posts: 925
Likes: 0
Received 6 Likes
on
6 Posts
Year: 1999
Model: Cherokee (XJ)
shifting issue identified??
Well, heard back from the mechanic this afternoon...Scan told him a&b solenoids are bad as well as the NSS. I have already had previous no start issue with the NSS, cleaned it up over two years ago.
He recommended I take it to a tranny specialists. How hard is it to swap out the solenoids? Whats the best place to purchase a new NSS? New solenoids? Should I just replace all three??? Thanks in advanced.
Taking the Jeep to Alaska at the end of June, so I really would like to get this resolved ASAP.
Original thread with issue from almost a year ago...
https://www.cherokeeforum.com/f2/int...e-stop-228762/
He recommended I take it to a tranny specialists. How hard is it to swap out the solenoids? Whats the best place to purchase a new NSS? New solenoids? Should I just replace all three??? Thanks in advanced.
Taking the Jeep to Alaska at the end of June, so I really would like to get this resolved ASAP.
Original thread with issue from almost a year ago...
https://www.cherokeeforum.com/f2/int...e-stop-228762/
Last edited by cbs_24; 05-22-2017 at 01:50 PM.
#2
CF Veteran
Join Date: Dec 2015
Location: PA
Posts: 3,038
Likes: 0
Received 333 Likes
on
277 Posts
Year: 1997
Model: Cherokee
Engine: 4.0L
Bought new solenoids off ebay last year, but have not installed them yet. Cant remember the part number, or what i paid, but you just drop the pan and they are right there. Replace all 3 since you are there. The AW4 takes Dex/Merc 3 fluid. I also bought an NSS from Omix-Ada, but was able to clean and reuse the original.
Last edited by fb97xj1; 05-22-2017 at 02:03 PM.
#3
Senior Member
Thread Starter
Join Date: Jun 2014
Location: Eagle River, Alaska
Posts: 925
Likes: 0
Received 6 Likes
on
6 Posts
Year: 1999
Model: Cherokee (XJ)
I have already fixed the NSS previously, just want to get a new one for piece of mind. Thanks for the other links. I found a good solenoid replacement link.