Safety of factory wheel studs with aftermarket wheels??
Thread Starter
Member
Joined: Nov 2012
Posts: 107
Likes: 1
Year: 1998
Model: Cherokee
Engine: 4.0
Safety of factory wheel studs with aftermarket wheels??
After installing a 3.5" Zone Offroad lift kit and putting a set of these rims on
http://www.4wheelparts.com/Wheels/Se...pn=PCW51-5865F
I noticed that my wheel studs only protude above the wheel surface by about 1/2". With the stock rims, they'd protrude out quite a bit more. Is it safe to run my factory wheel studs with these aftermarket rims??? Dunno if it makes a difference, but i'm running the factory acorn style lugnuts as well. Backspacing o these wheels should be about 3.75"
http://www.4wheelparts.com/Wheels/Se...pn=PCW51-5865F
I noticed that my wheel studs only protude above the wheel surface by about 1/2". With the stock rims, they'd protrude out quite a bit more. Is it safe to run my factory wheel studs with these aftermarket rims??? Dunno if it makes a difference, but i'm running the factory acorn style lugnuts as well. Backspacing o these wheels should be about 3.75"
Thread
Thread Starter
Forum
Replies
Last Post
NM-XJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
18
Oct 23, 2018 04:21 PM
2heapjeeps
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
13
Oct 4, 2015 10:52 PM
2heapjeeps
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
2
Sep 7, 2015 11:30 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)