Rounded the heads of the X-fer case side U joint Strap bolts... whats next?
#1
Seasoned Member
Thread Starter
Join Date: Sep 2010
Location: Brunswick County, NC
Posts: 473
Likes: 0
Received 1 Like
on
1 Post
Year: 1994
Model: Cherokee
Engine: 4.0
Rounded the heads of the X-fer case side U joint Strap bolts... whats next?
I rounded the bolt heads on the U joint straps right next to the transfer case. What is my next course of action?
I took the axle side straps off no problem... couldn't get the ratchet in the other set and had to use a gear wrench and they rounded right away.
Unless they are a different size than the axle side idk what I did wrong.
Whats the next thing to do?
I was planning on using a air chisel and knocking the heads off and the strap should come right off?
Ugh something simple always turns into a pain in the ***.... ugh
I took the axle side straps off no problem... couldn't get the ratchet in the other set and had to use a gear wrench and they rounded right away.
Unless they are a different size than the axle side idk what I did wrong.
Whats the next thing to do?
I was planning on using a air chisel and knocking the heads off and the strap should come right off?
Ugh something simple always turns into a pain in the ***.... ugh
Thread
Thread Starter
Forum
Replies
Last Post
SixShooterXJCherokee
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
09-23-2015 06:27 PM
SixShooterXJCherokee
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
08-30-2015 08:06 PM
Blazeorange
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
08-26-2015 11:32 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)