Valve Cover - Step by Step
#1
Seasoned Member
Thread Starter
Join Date: Nov 2011
Location: West Warwick, RI
Posts: 289
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Engine: 4.0L High Output
Valve Cover - Step by Step
Has anybody replaced a Valve Cover? It looks like a pretty much, easy job since the Cover is directly on top of the motor. Is it a just take the bolts off and pry it off kind of a deal? Im buying the Valve Cover set with everything included. (I WANT THE 4.0 BADGE ON TOP XD) But if anyone wants to chime in, lemme know!
#2
CF Veteran
Join Date: Sep 2011
Location: Frederick, MD
Posts: 10,447
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0
Super easy, theres a valve cover gasket write up on here, its the same thing
Last edited by my89xj; 12-01-2012 at 08:35 PM.
#3
CF Veteran
Join Date: Oct 2011
Location: Seal Beach, CA
Posts: 4,440
Likes: 0
Received 2 Likes
on
1 Post
Year: 1996
Model: Cherokee
Engine: 4.0 HO Straight Six
The CCV elbows are pretty difficult to get out in one piece, especially if they are original on a motor with your kind of mileage.
Get a rubber Felpro gasket.
There's one bolt in the rear of the valve cover that will be a PITA to get to. You'll need some nice extensions/swivels to get it.
When putting the valve cove back together, don't overtorque the bolts. Put the bolts in finger tight and only about a quarter to a half turn more.
I don't have a link to it right now but there are a couple write ups in the write up section. Go take a look.
Good luck buddy.
Get a rubber Felpro gasket.
There's one bolt in the rear of the valve cover that will be a PITA to get to. You'll need some nice extensions/swivels to get it.
When putting the valve cove back together, don't overtorque the bolts. Put the bolts in finger tight and only about a quarter to a half turn more.
I don't have a link to it right now but there are a couple write ups in the write up section. Go take a look.
Good luck buddy.
#4
Senior Member
Join Date: Aug 2012
Location: Goshen Ohio
Posts: 618
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: I6
Has anybody replaced a Valve Cover? It looks like a pretty much, easy job since the Cover is directly on top of the motor. Is it a just take the bolts off and pry it off kind of a deal? Im buying the Valve Cover set with everything included. (I WANT THE 4.0 BADGE ON TOP XD) But if anyone wants to chime in, lemme know!
Thread
Thread Starter
Forum
Replies
Last Post
madmanmarty
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
80
12-05-2015 11:21 AM
Blackxj51
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
23
09-24-2015 07:23 AM
golden210
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
09-23-2015 04:07 AM
CAT_Tech2
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
67
09-18-2015 08:26 AM
Blackxj51
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
22
09-13-2015 06:06 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)