Replaced tailgate, got a wiring question.
#1
Member
Thread Starter
Replaced tailgate, got a wiring question.
Howdy, had a small mishap on the XJ so it was best to replace the tailgate instead of trying to repair it.
my Jeep is a 200 and the replacement is from a 2001 model. The salvage yard, cut the harness about 16" from the tailgate itself. I pretty much color matched the connections and solder them together. But I noticed that the harness has two black wires. Would it matter on how I hook them up? or are they specific to each other? Any advice is greatly appreciated.
picture for reference.
my Jeep is a 200 and the replacement is from a 2001 model. The salvage yard, cut the harness about 16" from the tailgate itself. I pretty much color matched the connections and solder them together. But I noticed that the harness has two black wires. Would it matter on how I hook them up? or are they specific to each other? Any advice is greatly appreciated.
picture for reference.
Thread
Thread Starter
Forum
Replies
Last Post
max95xj
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
06-20-2017 09:16 PM
Jose Calderon
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
17
09-17-2015 08:57 PM
Zerocyde
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
08-24-2015 10:56 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)