ShortyzKustomz

Ok Im still fairly new to Jeeps especially the Renix, This thing has alot of hoses etc not hooked up and trying to clean everything up and get rid of some, Stock airbox was broken so I cut an old intake tube and used a cone filter I had around, What should I do with the vauum line off the egr?I originally went to a check valve in the air box. Its pulling a vacuum and I dont know if I should cap it off or what? And can I run a regular breather in the front valve cover hole, cause none of that is hooked up either. What else can I do away with and clean up, And are there any good posts on this subject, I looked around and couldnt find anything

mycherokee1989

You should invest in a haynes manual. the hose going from the front of valve cover does not need to be run to the air box. There are numerous problems with blowby though with this hose (pvc). I'll try to scan the vacuum hose diagram for you tomorrow.
Edit your pulldown. It says you have a 92

ShortyzKustomz

I got a Haynes manual Im asking more what I can get rid of, I just wasnt sure since Cherokees dont have pcv system and I havent delt with ccv systems before

Fraser

you will prob have to pull the valve cover off and clean it out good. the ccv rails in there get plugged up and all nasty, causing the system not to work properly. yes, you can put a breather on the front cover hole, a vent is a vent. the jeep should have a vacuum diagram on the drivers side firewall. there isnt much too it