jeepski89

Where can i find a hudge socket to get off these bolts on my 1996 cherokee, would an adjustable wrench get these bolts off, or are they on there pretty good? Im doing this in a few hours is there any special tricks yall know of


thanks!

wiggles

I have a socket set that can get off almost anything on the jeep I think it is a 30 mm is what I use

96xj4x4

i forget the exact size of the transfer case fill and drain plug but i know its big and your best bet is going to be getting the socket that fits it because alot of times its in there pretty tight. a big adjustable on there tight should be able to crack it too.

jeepski89

Im going to try it with the adjustable wrench first, im going to try the fill plug before i do the drain plug just incase, haha. if worst comes to worst i hope lowes or home depot has a socket or one of my buddies.

Brando26

i just got one from AAP. used a 1 1/4. though it had some wiggle room so it was prolly too big. still got the job done, they werent very tight.