rear windshield wiper not working
I cant get my rear windshield wiper to work correctly, it works fine when i hold down the button to use the windshield washer feature but if i just put it in normal mode to allow it to go by itself it doesnt work, is the actual wiper mode and washer mode on 2 different fuses any ideas?
|
I would either replace the switch or tear it apart and look closely at the switch connection 2 which leads to plug pin 4.
0 = off 2 = wiper only 1 = wiper and pump Above is internal numbering, dual side switch. 1 = ground 2 = pump (1, one side of internal switch) 3 = lamp 4 = wiper (1 and 2 on switch feed to this, other side) 5 = fused input 6 = to motor (motor is fused) Plug numbering |
pritty sure they are on the same fuze. but i never use mine any ways. I actually have my wiper fluid hose rigged up so it shoots out backwards for pesty tailgaters. They are lucky i dont fill it up with anything else! lol
|
So the blade moves when you press down, but not when you click it in the first position?
|
Originally Posted by MickDime
(Post 751616)
So the blade moves when you press down, but not when you click it in the first position?
|
My best guess it is something with the switch then
it is not a fuse or the motor itself you can get OEM spares for like $15 |
All times are GMT -5. The time now is 07:12 PM. |
© 2024 MH Sub I, LLC dba Internet Brands