Rear passenger power window
#1
Member
Thread Starter
Join Date: Jul 2015
Location: Sugar Land, TEXAS
Posts: 232
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0 165,00 Miles
Rear passenger power window
I have checked but there are so many combinations of issues that finding mine has not gotten me anywhere. The rear passenger window will not move. And of course the motor doesn't make a sound. The electric door locks work. All other doors windows etc. work from the driver door and each individual door and window.
Only the passenger rear window will not work from the driver main control or the actual door itself. I assume the motor is bad. I have NO IDEA how to check the motor to make sure and I do have a Multi Meter. I don't really know how to use it and I can not read a schematic although I have a FSM.
If someone can tell me Exactly how to check it I will. The panel is off and and I'm ready but need explicit instructions. Anyone care to spend some well appreciated time to show me?
Only the passenger rear window will not work from the driver main control or the actual door itself. I assume the motor is bad. I have NO IDEA how to check the motor to make sure and I do have a Multi Meter. I don't really know how to use it and I can not read a schematic although I have a FSM.
If someone can tell me Exactly how to check it I will. The panel is off and and I'm ready but need explicit instructions. Anyone care to spend some well appreciated time to show me?
#2
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,874
Received 1,526 Likes
on
1,238 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
Real quickly.
One side of the motor connector will have voltage in one direction and the other side of the connector in the other direction.
One side of the motor connector will have voltage in one direction and the other side of the connector in the other direction.
#3
are the connectors all connected 100%? I know that if one of my door connections are loose or disconnected, none of the windows work. It's kind of dumb.
Typically some connections in the switch go bad.. or at least that's what I've heard.
Typically some connections in the switch go bad.. or at least that's what I've heard.
#4
Member
Thread Starter
Join Date: Jul 2015
Location: Sugar Land, TEXAS
Posts: 232
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0 165,00 Miles
I am like the kid with the knife and outlet you post Cruiser. I really am clueless. I just never learned electrical stuff except respect for it. Thanks Cruiser. I think I know what you mean + - . Thanks hpwrestler, I will check them. Anyone else since I will do this tomorrow?
#5
CF Veteran
Join Date: Feb 2015
Location: North Carolina
Posts: 1,528
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1993
Model: Cherokee
Engine: 4.0
I am like the kid with the knife and outlet you post Cruiser. I really am clueless. I just never learned electrical stuff except respect for it. Thanks Cruiser. I think I know what you mean + - . Thanks hpwrestler, I will check them. Anyone else since I will do this tomorrow?
#6
Member
Thread Starter
Join Date: Jul 2015
Location: Sugar Land, TEXAS
Posts: 232
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0 165,00 Miles
#7
Newbie
Join Date: May 2016
Location: Florida
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0L I6 cylinder - 2WD
Did you figure out the problem with your passenger rear window? i just bought a 2001 2wd xj and am having the same problem with the rear window...your insight is appreciated. thanks
Thread
Thread Starter
Forum
Replies
Last Post
pTacRP
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
17
12-14-2015 10:56 AM
seahorseracing
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
4
10-27-2015 08:52 PM
ScoundrelScribe
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
10-23-2015 07:59 PM
Monroeduck
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
10-20-2015 07:57 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)