Quick help with a cruiser tip?
#1
Senior Member
Thread Starter
Quick help with a cruiser tip?
Doing work to my jeep so decided it was time to do the Cruiser valve cover mod. I watched a video on YouTube and on the guys jeep his tube has no hole already in it on any side.
However when I took mine off it already has a hole on the smallest side. Should I still drill one on the side facing the front window.
Here is what I mean by "it already has a hole."
Do I still need to drill another hole on the right side?
However when I took mine off it already has a hole on the smallest side. Should I still drill one on the side facing the front window.
Here is what I mean by "it already has a hole."
Do I still need to drill another hole on the right side?
#3
Junior Member
I am curious of the answer here. I encountered the same thing on my 1989 XJ 4.0L. Mine looked exactly like that. I was thinking maybe was already done, needed to get the jeep moving anyways, so I slapped it back on and moved on.
#4
Senior Member
Thread Starter
^ I am just going to put it back together with the hole that's already there plus the inch I cut off. I need to get it back going.
#5
Senior Member
Thread Starter
I went to check Cruiser site for something else and went ahead and clicked on the Valve Cover Mod and in his pictures the hole is the same as mine. So I guess it doesn't matter.
The reason for the confusion was I originally watched a youtube video of the valve cover mod (cruiser even has the same video on his site) and in the video his tubes had no holes and he said to be sure to drill the holes facing the window......
Anyway, just wanted to clear that up for anybody.
The reason for the confusion was I originally watched a youtube video of the valve cover mod (cruiser even has the same video on his site) and in the video his tubes had no holes and he said to be sure to drill the holes facing the window......
Anyway, just wanted to clear that up for anybody.
#6
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,875
Received 1,526 Likes
on
1,238 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
I don't think it really matters which side of the flute the hole is drilled on.
#7
Junior Member
Thread
Thread Starter
Forum
Replies
Last Post
SuperRA
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
49
05-07-2015 10:03 PM
gluegrubber
Other Vehicles. Other Jeep models & cars and trucks of other makes
3
07-03-2011 11:51 PM
mike
Other Vehicles. Other Jeep models & cars and trucks of other makes
24
02-16-2009 01:10 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)