So I had a problem last week where the windows quit working and I kind of knew it was coming (I had already repaired the passenger side). So I pulled the drivers-side module and re-soldered all the connections, which brought it back to life. But I had noticed the auto drivers window switch wasn't returning to position quite the same as the others. So I popped the switch off and saw the metal actuator was not sitting correctly. I fixed it and everything seemed to line up. But when I hooked it all back up, now the window goes down all the way and can't be stopped, and there is a bit of delay before I can roll it back up. I am sure if I swap the module out it will fix whatever problem I'm having but, has anyone ever seen this and know if it's possibly the relay on the board or something 'not' the actual switch? I tried putting it back in the position I found it in also, but then it just wouldn't actuate... I'm a little stumped. This was also a replacement module it seems, since the date stamped on it is 2015...