Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

Poping Noise?

Thread Tools
 
Search this Thread
 
Old Feb 23, 2009 | 10:20 AM
  #1  
Stillwater Outfitters XJ's Avatar
Thread Starter
Member
 
Joined: Jan 2009
Posts: 235
Likes: 0
From: Littleton Colorado
Year: 2000
Model: Cherokee
Engine: 4.0
Default Poping Noise?

Yesterday i noticed that every time i would make a turn i would hear a poping noise from the front end any one have any ideas?
Reply
Old Feb 23, 2009 | 10:39 AM
  #2  
XJSETH's Avatar
CF Veteran
 
Joined: Jan 2009
Posts: 3,513
Likes: 0
From: Aurora
Year: 1997 XJ
Model: Cherokee
Engine: 4.0 HO JASPER MOTOR
Default

ryan i got the same problem. its more than likely the track bar it never did that until i put on the drop bracket. it pops all the time.
Reply
Old Feb 23, 2009 | 10:40 AM
  #3  
Stillwater Outfitters XJ's Avatar
Thread Starter
Member
 
Joined: Jan 2009
Posts: 235
Likes: 0
From: Littleton Colorado
Year: 2000
Model: Cherokee
Engine: 4.0
Default

Ya it feels like some thing in the steering
Reply
Old Feb 23, 2009 | 10:51 AM
  #4  
XJSETH's Avatar
CF Veteran
 
Joined: Jan 2009
Posts: 3,513
Likes: 0
From: Aurora
Year: 1997 XJ
Model: Cherokee
Engine: 4.0 HO JASPER MOTOR
Default

yup i crawled under and checked everything several times. all looks good. even took it my mechanic (i use him for the big stuff), he said that is because of the tires and amount of lift. so thats why im buying a RE adjustable trackbar with the mounting bracket so i can eliminate the drop bracket.
Reply
Old Feb 23, 2009 | 11:34 AM
  #5  
Stillwater Outfitters XJ's Avatar
Thread Starter
Member
 
Joined: Jan 2009
Posts: 235
Likes: 0
From: Littleton Colorado
Year: 2000
Model: Cherokee
Engine: 4.0
Default

Ya i should prob get one but $$$ is a factor
Reply
Old Feb 23, 2009 | 11:45 AM
  #6  
XJSETH's Avatar
CF Veteran
 
Joined: Jan 2009
Posts: 3,513
Likes: 0
From: Aurora
Year: 1997 XJ
Model: Cherokee
Engine: 4.0 HO JASPER MOTOR
Default

yeah im in the same boat every couple of weeks i buy a new part for the jeep so i can do a big install in a few months. prob going to do a build thread.
Reply
Old Feb 23, 2009 | 02:27 PM
  #7  
MasterShakeXJ's Avatar
CF Veteran
 
Joined: Nov 2008
Posts: 1,251
Likes: 0
From: Eugene, OR
Year: 01
Model: Cherokee
Engine: 4.0L I6
Default

get an adjustable tracbar . even if it seems tight and good, it's not. otherwise it wouldnt pop. do you have your stock one in?
Reply
Old Feb 23, 2009 | 02:31 PM
  #8  
COSXJFAN's Avatar
Do you hear banjos?
Premium Member
15 Year Member
 
Joined: Apr 2008
Posts: 9,644
Likes: 6
Model: Cherokee
Default

Yep, knowing the trails you guys run, I'd put one in ASAP!! You already know this though!! LOL!! TB drops, or extensions, are just a temporary solution, IMHO!! Hope you get er figured out!! Peace!!
Reply
Old Feb 23, 2009 | 02:57 PM
  #9  
gabe's Avatar
Member
 
Joined: Jan 2009
Posts: 248
Likes: 2
From: ohio
Year: 1992
Model: Cherokee
Engine: 93 4.0HO
Default

I had a bad pop,and it went away after i put a daystar controll arm bushing kit.It also improved handling and ride a bunch,I mean nite and day.I also heard the pop every time I would steer over a quarter turn,and it is gone now.
Reply
Old Feb 23, 2009 | 10:55 PM
  #10  
Stillwater Outfitters XJ's Avatar
Thread Starter
Member
 
Joined: Jan 2009
Posts: 235
Likes: 0
From: Littleton Colorado
Year: 2000
Model: Cherokee
Engine: 4.0
Default

Ya still the stock one i have close to 4-4.5" of lift so which one would i have to get? and would i have to get a different one in the future when i get a bigger lift and tires?
Reply
Old Feb 23, 2009 | 10:59 PM
  #11  
BuckB91XJ's Avatar
CF Veteran
 
Joined: Nov 2008
Posts: 6,989
Likes: 4
From: Oak Harbor, WA.
Year: 1987
Model: Cherokee
Engine: 4.0 liter RENIX I-6, DIY Cold Air Intake, 2.5 FM Exhaust, 3 Core Radiator
Default

Make sure your track bar is torqued to stock specs (not just tight). 72 ft. lbs. at the bottom and 64 ft. lbs. at the top. If your bottom mount is not properly torqued it can cause your popping noise.
Reply
Old Feb 24, 2009 | 04:22 PM
  #12  
Stillwater Outfitters XJ's Avatar
Thread Starter
Member
 
Joined: Jan 2009
Posts: 235
Likes: 0
From: Littleton Colorado
Year: 2000
Model: Cherokee
Engine: 4.0
Default

would any thing else other than the trac bar cause this noise is it some thing to worry about or is it just another noise are XJ s make with out an ajus trac bar
Reply
Old Feb 24, 2009 | 05:01 PM
  #13  
tommy's Avatar
Member
 
Joined: Feb 2009
Posts: 106
Likes: 0
From: Farmington New Mexico
Year: 1991
Model: Cherokee
Engine: 4.0 L
Default

I have that same sound in my xj only started after i put a lift on. look start it and have someone else sit inside and turn it slightly back and forth so you can look underneath and see whats popping. For me it is my "home made" adjustable tracbar. It pops back and forth in the threads depending on where the stress is on my axle. it could unfortunately be anything in your steering and control arms so as you observe it put your hand on different pieces to feel where it pops the loudest and you can find the source
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Austindude2015
Cherokee Chat
17
Dec 28, 2020 05:12 PM
LittleRed94
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
Oct 6, 2015 08:09 PM
Freakn
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
52
Oct 4, 2015 06:34 AM
Lightning_19k
Modified XJ Cherokee Tech
14
Oct 3, 2015 09:52 PM
redrooster
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
Oct 2, 2015 12:35 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 02:00 AM.