ihscoutlover

I am looking for some photos of anyones stock exhaust on their 2000+ XJ exhaust, at the very rear of the Jeep. I have a stock replacement hanger that I am needing to see just how it is supposed to go into place. I will try and post up a picture in the morning of what I have and where it should go, but it doesn't look right for some reason. It needs to be where it connects at the rear of the Jeep, around the reciever hitch if it has one, or in that general area. Any help in this matter would be awesome.

Jeff

Turbo X_J

Already been done:
https://www.cherokeeforum.com/f2/picture-exhaust-hanger-installed-125899/

ihscoutlover

Thanks Turbo, however its a little hard to sort of see the rear pic. The front part of that pipe was the easy one, but it looks like I need another ubolt/clamp assembly to hold the pipe to that bracket. I see how the metal plate goes onto those two bolts, as it is made for the setup, but the pipe has a second welded bar that looks to go through either a rubber hanger, or some kind of similar setup. I am guessing I could cut that off and just go straight off the pipe with the clamp and hanger assembly then??

Jeff

ihscoutlover

I figured it out now. It kind of made some sense, but now its a little clearer. I will take a photo of mine tomorrow and then all can see just how it is supposed to go together. Thanks for the help again.

Jeff