P0320 Won't start
#1
Newbie
Thread Starter
Join Date: Sep 2018
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee (XJ)
P0320 Won't start
I've got a 2000 XJ that's throwing p0320 and won't start. I've changed the CPS and cam position sensor. I've tapped into both sensor signal wires with a frequency meter and see that each sensor is at least generating pulses when cranking. I've got a little spurt of fuel when pressing the schraeder on the fuel rail. One interesting point is that the ground pin on each sensor connector is about 40 ohms to the neg terminal on the battery. Ground connections look good... is this resistance too high?
What else can I check?
Can I swap PCM's with my wifes 99 XJ?
Thanks
What else can I check?
Can I swap PCM's with my wifes 99 XJ?
Thanks
#3
Newbie
Thread Starter
Join Date: Sep 2018
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee (XJ)
Thread
Thread Starter
Forum
Replies
Last Post
jimpad
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-27-2018 03:35 PM
elistwrt
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
16
01-01-2014 07:14 PM
timsandri
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
02-17-2013 08:49 AM
truckntractorhick
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
04-12-2011 02:54 PM
ptaheavy
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
11-08-2010 12:31 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)