New tranny mount=bad vibration
#61
CF Veteran
Join Date: Oct 2013
Location: Greenville, SC
Posts: 5,920
Likes: 0
Received 190 Likes
on
165 Posts
Year: 1999
Model: Cherokee(XJ)
Engine: 4.0
Originally Posted by paroxysym
so the napa mount seems to be the only reliable option? or is the crown mount decent?
im going to be adjusting my brown dog motor mounts in hopes it helps my current vibes, but that rattle/knock doing idle I doubt will go away as its the shorter anchor mount causing the exhaust to hit the crossmember.... am I right?
im going to be adjusting my brown dog motor mounts in hopes it helps my current vibes, but that rattle/knock doing idle I doubt will go away as its the shorter anchor mount causing the exhaust to hit the crossmember.... am I right?
#62
Senior Member
Join Date: Mar 2010
Location: Alaska
Posts: 589
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee(XJ)
ive had the anchor mount on for couple of months now, the small vibration i still had after was the alignment in the front tires. honest my opinion the anchor mount works good the rubber is not as most described, it is solid!
marc
marc
#63
Seasoned Member
Join Date: Oct 2008
Location: Baltimore, MD
Posts: 452
Likes: 0
Received 2 Likes
on
2 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
ive had it installed foe a week now, put about 300mi on it and I still have vibes from the exhaust contacting the crossmember- the anchor is shorter than the stock mount if im not mistaken
#64
Beach Bum
FYI. Here is a link to my comparison of Anchor motor mounts versus Omix-ADA. https://www.cherokeeforum.com/f2/che...2/#post3162347
The following users liked this post:
Ms Larr (07-26-2021)
#66
Seasoned Member
Join Date: Oct 2008
Location: Baltimore, MD
Posts: 452
Likes: 0
Received 2 Likes
on
2 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
don't do it. lol
ive had mine in prob 2 weeks now, prob 600mi on it and its not gotten any better. the exhaust is still rattling off the damn crossmember- in park or neutral its not bad but in drive its aggressive until I get going. plus I hear it bang off the crossmember from time to time. I ordered a new OEM mount, cost $165 but its either than or a cheapie like anchor and im not satisfied with it. thankfully amazon has given me till feb to return it so new OEM one goes in next week,.
I also installed brown dog motor mounts at the same time and now I know for sure those are broken in and not causing my vibes.
#67
CF Veteran
Join Date: Feb 2016
Location: Northern New Mexico
Posts: 3,683
Likes: 0
Received 7 Likes
on
6 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
don't do it. lol
ive had mine in prob 2 weeks now, prob 600mi on it and its not gotten any better. the exhaust is still rattling off the damn crossmember- in park or neutral its not bad but in drive its aggressive until I get going. plus I hear it bang off the crossmember from time to time. I ordered a new OEM mount, cost $165 but its either than or a cheapie like anchor and im not satisfied with it. thankfully amazon has given me till feb to return it so new OEM one goes in next week,.
I also installed brown dog motor mounts at the same time and now I know for sure those are broken in and not causing my vibes.
ive had mine in prob 2 weeks now, prob 600mi on it and its not gotten any better. the exhaust is still rattling off the damn crossmember- in park or neutral its not bad but in drive its aggressive until I get going. plus I hear it bang off the crossmember from time to time. I ordered a new OEM mount, cost $165 but its either than or a cheapie like anchor and im not satisfied with it. thankfully amazon has given me till feb to return it so new OEM one goes in next week,.
I also installed brown dog motor mounts at the same time and now I know for sure those are broken in and not causing my vibes.
#68
CF Veteran
Join Date: Nov 2017
Location: Groton, MA
Posts: 3,695
Received 234 Likes
on
207 Posts
Year: 1995
Model: Cherokee(XJ)
Engine: I6 4.0L
Someone mentioned that the tranny mount install is simple with a floor jack - What about the motor mounts - are they replaceable without having fancy engine lifts and without pulling the whole engine out?
#69
CF Veteran
Join Date: Oct 2013
Location: Greenville, SC
Posts: 5,920
Likes: 0
Received 190 Likes
on
165 Posts
Year: 1999
Model: Cherokee(XJ)
Engine: 4.0
Originally Posted by PatHenry
Someone mentioned that the tranny mount install is simple with a floor jack - What about the motor mounts - are they replaceable without having fancy engine lifts and without pulling the whole engine out?
Thread
Thread Starter
Forum
Replies
Last Post
BillyBoy
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
01-12-2016 01:32 PM
azdave35
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
12-30-2015 08:55 PM
Freeskierbrady
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
12-26-2015 09:24 PM
dcollins3208
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
12-23-2015 11:50 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)