Need to re-program keyless remote 2001 Xj?
#1
Junior Member
Thread Starter
Need to re-program keyless remote 2001 Xj?
We changed the two batteries in the factory keyless remote and still nothing. Now what? I thought maybe the factory remote needed to be re-programmed after changing the batteries but i find no information regarding such a procedure. What do you all do in a case like this? Thank you.
Last edited by Dibbons; 01-07-2019 at 08:24 PM.
#2
Junior Member
Thread Starter
Dealer only?
P.S. The remote calls for lithium batteries (two) CR 2032 but we found 2016's inside. The (wrong) 2016's had been working for a long time until now.
Just found a thread stating that only the dealer can program the keyless remote with a special scan tool. However, that still does not tell me what went wrong with my original remote, anyone repair theirs? I looked inside with a magnifying glass and everything looked intact.
Just found a thread stating that only the dealer can program the keyless remote with a special scan tool. However, that still does not tell me what went wrong with my original remote, anyone repair theirs? I looked inside with a magnifying glass and everything looked intact.
#4
Junior Member
Thread Starter
Someone else installed the batteries. So I double checked to make sure both were sitting with the positive terminal side up (as it's marked inside the battery compartment). That's about all I can do for now, thank you.
Thread
Thread Starter
Forum
Replies
Last Post
Fsandefur
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
16
11-27-2016 11:55 AM
ACC
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
15
05-29-2014 07:55 AM
TURBINE MAN
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
02-08-2011 09:08 PM
cherokee01
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
06-21-2010 12:07 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)