Need part number asap!
 

So while cutting the lower control arm mounts off with a plasma... The Sparks were a little too hot for the plastic fuel line. So Needless to say, I need a new one. But the dealer can't guarantee the number they come up with is correct, and the drawing is a joke that they have to use. I'm stuck paying for it even if it isn't correct since its a special order part. The line I need goes from the fuel rail to the frame rail right below the drivers feet. Where there is another connector to the feed from the tank. Any help would be great. Jeep is stranded!

The OEM part number is 52100349AB.


Dealer part.


MSRP $64.70

Awesome thanks man. Are you 100% that's the one? Common part to go bad? I just don't wanna get stuck with something I don't need. And they're charging me $77. Does that seem right?

just order the part online. Or go to a parts store

Dealer only part.

lol I've bought many dealer "only" parts online.

You can buy dealer parts on line, like from Mopar America.com, if you want to pay for shipping.


OP,


You can go to the dealer and have them look it up for you. Keep my part number in your pocket and when they spit out a part number see if it matches mine.


Generally, if I tell you a chicken can haul a freight train, you better start hitching him up. ;-)

They usually last a long time. The weak spot is the steel coupler under the Jeep. It gets ate up with rust and starts puking fuel out.


See my above post.

Except when you burn them with a plasma cutter as described in Post 1..............

It's a wonder he didn't burn the Jeep to the ground using the plasma cutter near a plastic fuel line.

Only you and I noticed this?