Need help quick
 

replacing fuel pump in my 96 cherokee and the guy i did it with pulled the wires that are orange black and all what order do they hook up ? please be fast

Taken from another Jeep site...

"There should be 5 wires at your pump connector.

There will be a dark green/red, this is the power feed that comes from the pump relay.

There will be a black/light blue wire. This is the sensor ground wire for the level sending unit. This comes from the engine controller.

There will be a dark blue wire. This is the sending unit's output to the instrument cluster for the gauge.

There will be a dark blue/white wire. This goes to the cluster for the low fuel message.

There will be a black wire. This is the ground for the pump motor"

http://www.2carpros.com/forum/automo...l_pump_1_1.jpg

but what order is this from left to right is that even the order?

i have a yellow , green , blue , and orange?