NEED HELP I have no idea what this is?
#1
Junior Member
Thread Starter
Join Date: Feb 2010
Location: Lilburn, GA
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0L I6
NEED HELP I have no idea what this is?
So I have no idea what the %$#! this is. I have been told several opinions of what it "might" be.
1. Lojack
2. Performance chip
Now I am also wondering if it comes stock in the Cherokee. It almost seems that it does but I am obviously not sure.
Any feedback is greatly appreciated.
Thanks.
1. Lojack
2. Performance chip
Now I am also wondering if it comes stock in the Cherokee. It almost seems that it does but I am obviously not sure.
Any feedback is greatly appreciated.
Thanks.
Trending Topics
#8
Junior Member
Thread Starter
Join Date: Feb 2010
Location: Lilburn, GA
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0L I6
Well lots of feedback quick!!!
Yes I think it is a SPY CAMERA then again its too old to be from the Bush or Obama administration so it cant be that. XD
I have a 1993 Cherokee Sport so if it is a keyless entry that is awesome.
Anyway to find out if it truly is keyless entry or not?
Yes I think it is a SPY CAMERA then again its too old to be from the Bush or Obama administration so it cant be that. XD
I have a 1993 Cherokee Sport so if it is a keyless entry that is awesome.
Anyway to find out if it truly is keyless entry or not?
#10
Junior Member
Thread Starter
Join Date: Feb 2010
Location: Lilburn, GA
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0L I6
Well enough of you said that it is, so I believe it!
That is honestly the best realization I have had on my Jeep so far.
Thanks everyone for the feedback.
I kind of feel dumb for not being able to figure that one out though. =/
Any idea how much it is and if any place else sells it?
That is honestly the best realization I have had on my Jeep so far.
Thanks everyone for the feedback.
I kind of feel dumb for not being able to figure that one out though. =/
IR "eye" for keyless entry. Its stock.
You can buy a transmitter off ebay, I have a part in the FSM that tells how to set it up.
You can buy a transmitter off ebay, I have a part in the FSM that tells how to set it up.
#11
I use mine strictly as a conversation piece...
Works every time!
i think the Keyless Entry was an option, because i've seen them in other models as well, mine is a Sport.
From what i understand, most have never worked all that well, i've never even thought about replacing mine...
Works every time!
i think the Keyless Entry was an option, because i've seen them in other models as well, mine is a Sport.
From what i understand, most have never worked all that well, i've never even thought about replacing mine...
Last edited by guest02; 02-26-2010 at 12:25 AM.
#12
CF Veteran
My girlfriends 96 sport has it.
Here is the fob you will need:
http://cgi.ebay.com/ebaymotors/Jeep-...Q5fAccessories
It says grand cherokee, but its the same as what my girlfriend 96 uses.
Here is what Ive found from teh FSM so far, Ill post more as I find it:
Here is the fob you will need:
http://cgi.ebay.com/ebaymotors/Jeep-...Q5fAccessories
It says grand cherokee, but its the same as what my girlfriend 96 uses.
Here is what Ive found from teh FSM so far, Ill post more as I find it:
TRANSMITTER PROGRAMMING PROCEDURE
(1) Open the driver’s door of the vehicle. Leave it
open through the programming procedure.
(2) Move the mechanical door lock lever to the
LOCK position.
(3) Turn the ignition switch to the ON position.
(4) Within 20 seconds, aim a transmitter at the
keyless entry module receiver dome and press the
LOCK button for at least 5 seconds. Once the module
accepts the programming code, the driver’s door will
unlock.
(5) Once the first transmitter has been programmed,
additional transmitters (up to 4) may be
programmed into the module. Within 20 seconds of
the previous transmitter programming, move the mechanical
door lock lever to the LOCK position. Aim
another transmitter at the receiver dome and press
the LOCK button for at least 5 seconds. The door
lock will cycle again.
(6) To lock the programmed codes into the module,
the ignition switch must be turned OFF and back
ON within 20 seconds after programming the last
transmitter’s code. At that time, all previous codes
are erased from the module.
(1) Open the driver’s door of the vehicle. Leave it
open through the programming procedure.
(2) Move the mechanical door lock lever to the
LOCK position.
(3) Turn the ignition switch to the ON position.
(4) Within 20 seconds, aim a transmitter at the
keyless entry module receiver dome and press the
LOCK button for at least 5 seconds. Once the module
accepts the programming code, the driver’s door will
unlock.
(5) Once the first transmitter has been programmed,
additional transmitters (up to 4) may be
programmed into the module. Within 20 seconds of
the previous transmitter programming, move the mechanical
door lock lever to the LOCK position. Aim
another transmitter at the receiver dome and press
the LOCK button for at least 5 seconds. The door
lock will cycle again.
(6) To lock the programmed codes into the module,
the ignition switch must be turned OFF and back
ON within 20 seconds after programming the last
transmitter’s code. At that time, all previous codes
are erased from the module.
Last edited by 89Laredo; 02-26-2010 at 12:19 AM.