madmanmarty

I have tried Napa,autozone,2 hardware stores,online jeep parts(not listed in part diagram) to find this part.
It holds the throttle cable guide onto the valve cover,& is a interior serrated washer that has specific measurements to hold the guide on.
Any help would be appreciated.

dans98xj

It's a push nut. I would check home depot or lowes. McMaster Carr has them 200 to a pack for 6 -7 bucks.

Fred/N0AZZ

That is an issue you will find at most all places selling them, all in bulk packs. I hate that and have a lot of other small parts that I have bought over the years where I have only used a few of them and have a lot of whatever it is left over.

2000CHERO

I'm on my phone so can't see where you're located, but local to me we have Hectors Hardware, has every bolt, nut, stupid piece that I've needed for my jeep.

It's basically an Ace Hardware, if you have one local to you check there, and if you can find it ask someone, they'll have it.

I just bought 8 to put my oem flares back on.

Sandyman

Not to hijack but I need the guide that pushes into the pins on the valve cover and fits on the left side of the valve cover (when viewed from the front). It holds all three cables that crossover to the manifold. I need one and there is no part number or info anywhere. Anyone know where I can get one? Thank you. Sandyman

madmanmarty

Been to ace & true value hardware. No luck.
I have one more place to try.
Home Depot & lowes are 45 minutes away.
Fred if I can't get locally would you be willing to sell me 2?
Sandy,the part you are looking for is called "guide, accelerator cable",& is available from factorychryslerparts.com. Drill down to throttle controls,stock code 52079029.
It's only $2.

Sandyman

MADMAN You are Da MAN Thank you Sandyman BTW shipping is 16.00

93XJeeper

I just threaded it and put a nut on it. It's easier to get off in the future too.

madmanmarty

93,that's a good idea.