dcollins3208

Hey guys, need a couple gasket sizes before I embark on my next project.

Just a little back story, trans pan gasket is leaking a bit and my trans cooler hard lines are rusted in a few places (but not leaking) so I'm draining the fluid, changing the trans pan gasket, replacing the hard lines with steel braided hose (running to new transmission cooler) and removing the quick disconnect adapters for the trans cooler lines from the transmission and installing some 14x1.5 to 3/8 barb fittings in their place. I'm also removing the NSS to clean it.

I haven't been able to track down the following gasket/ o-ring sizes, so if you guys could help out it will be much appreciated!

O-ring size or part number that goes over the threads of the quick disconnect fittings that thread into the transmission... Would it just be a 14mm Viton o-ring?

Gasket size or part number for the gasket behind the washer and large nut on the NSS shaft