Mystery steel fell out of rear tranny shaft?
#1
Newbie
Thread Starter
Join Date: Dec 2009
Location: New York City
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Year: 95
Model: Cherokee
Engine: 4.0
Mystery steel fell out of rear tranny shaft?
Please pardon my lack of terminology, but my manual is with my jeep at home.
I am in the process of rebuilding my AW4. When I removed the adapter housing from the rear of the unit, and then removed the bar shaped unit (cannot remember the name but it has rounded ends and is about 2.5 inches long, perpendicular to the shaft and it slides off) from the rear of the shaft, a little 3/4"x1/4" crescent shaped piece of metal fell out of the side of the shaft!
Does anyone know what that piece is for and why it just fell out?
Other than that, the proposed rebuild is going well.
Thanks-
I am in the process of rebuilding my AW4. When I removed the adapter housing from the rear of the unit, and then removed the bar shaped unit (cannot remember the name but it has rounded ends and is about 2.5 inches long, perpendicular to the shaft and it slides off) from the rear of the shaft, a little 3/4"x1/4" crescent shaped piece of metal fell out of the side of the shaft!
Does anyone know what that piece is for and why it just fell out?
Other than that, the proposed rebuild is going well.
Thanks-
Thread
Thread Starter
Forum
Replies
Last Post
hpwrestler220
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
03-03-2017 01:13 AM
RickJames Bish
Modified XJ Cherokee Tech
5
09-02-2015 03:22 PM
blueseasons
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
3
09-01-2015 06:02 PM
Blazeorange
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
08-26-2015 11:32 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)