my new best friend rusty
#1
Newbie
Thread Starter
Join Date: Nov 2008
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0
my new best friend rusty
hello i'm new here and just bought my first cherokee. my wife and i found rust holes in the floor earlier. not a real big deal a little upseting. we got a estamete of 350 dollars to fix and seal that. them we found a hole in the rear 1/4 panel where the wheel well and inner fender meet. we also found rust on the rocker panel on both pass and driver side rear doors. that made the cost of repair 1075 dollars! we only paid 1800 for the jeep. i'm thinking about junking it any advice.
#2
CF Veteran
Join Date: Apr 2008
Location: Northern Illinois
Posts: 2,237
Likes: 0
Received 3 Likes
on
3 Posts
Year: 90
Model: Cherokee
Engine: 4.0
That's the only rust holes????
That's really not too bad at all.... Those are all known rust areas on Cherokees.
The floorboards can be repaired for less than 50 bucks and some work.
ALOT of us just cut off and seal the rear quarter panels for more tire clearance.
Complete rocker panels are available from the aftermarket. But.. alot of us cut them off and replace them with a rock slider tube.
That's really not too bad at all.... Those are all known rust areas on Cherokees.
The floorboards can be repaired for less than 50 bucks and some work.
ALOT of us just cut off and seal the rear quarter panels for more tire clearance.
Complete rocker panels are available from the aftermarket. But.. alot of us cut them off and replace them with a rock slider tube.
#3
Newbie
Thread Starter
Join Date: Nov 2008
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0
rust
i also recieved a quote of 100 dollars less for the floor. but the second guy says they (the first guy)won't seal it and it will rust trough again in less than a year. i don't know who to trust
#4
CF Veteran
Join Date: Aug 2008
Location: palm desert,ca
Posts: 1,313
Likes: 0
Received 1 Like
on
1 Post
Year: 1987
Model: Wagoneer
Engine: 4.0
patch panels. two words that are cheap and easy. dont get upset yet. you can buy everyone of those pieces for less than 250 bucks and weld them in. hell you could buy a cheap welder and all the parts and still be at 1/3 of what your qoutes are....
#5
Newbie
Thread Starter
Join Date: Nov 2008
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0
i'll look into the pieces thanks
#6
CF Veteran
Join Date: Nov 2008
Posts: 2,003
Likes: 0
Received 4 Likes
on
3 Posts
Year: 1987
Model: Cherokee
Engine: 4.0
they make floor pans for cherokees. a bit of work with a cutting wheel, and some zip screws, and some body sealer plus a bit of undercoat and bedliner, and you'll have perfect floors.
Trending Topics
#14
CF Veteran
Join Date: Jul 2008
Location: Schnecksville, PA
Posts: 1,217
Likes: 0
Received 5 Likes
on
5 Posts
Year: 94 XJ
Model: Cherokee
Engine: 4.0L
CF has members EVERYWHERE. And many of them are willing to give a helping hand. Whether it be in info, acqusition of parts, or a REAL helping-hand. We are "wierd" that way, but its a wierd in a nice way.
Just have to ask.
Just have to ask.