my 91 laredo cherokee wont engage into 4high

Reply Subscribe

Thread Tools

Search this Thread

01-12-2010, 09:56 PM

goblinish15

Senior Member

Thread Starter

Join Date: Nov 2009

Location: McCall,Idaho

Posts: 539

Likes: 0

Received 0 Likes on 0 Posts

Year: 1991

Model: Cherokee

Engine: 4.0L high output with compressed valves

my 91 laredo cherokee wont engage into 4high

it will go in to any other drive but not 4 high. It was working fine and then i got stuck then the 4high just wont engage since then. any ideas?

Reply Like

01-12-2010, 10:01 PM

davirbaked

Junior Member

Join Date: Jan 2010

Location: gresham oregon

Posts: 84

Likes: 0

Received 0 Likes on 0 Posts

Year: 1990

Model: Cherokee

Engine: 4.0

do you have the vaccum style front axle.. if so i'd check that..

i had the vaccum style i had to put it in neutral shift into 4 then drive back and forth 5 or ten times before it would engage... and i'm not 100% sure if 91 still had that or not

Last edited by davirbaked; 01-13-2010 at 07:06 PM.

Reply Like

01-13-2010, 12:15 AM

mike37

CF Veteran

Join Date: Nov 2008

Location: Paso Robles Ca

Posts: 2,473

Likes: 0

Received 9 Likes on 9 Posts

Year: 1991

Model: Cherokee

Engine: 4.0

Quote:

Originally Posted by goblinish15

it will go in to any other drive but not 4 high. It was working fine and then i got stuck then the 4high just wont engage since then. any ideas?

get under there and check for mud around the linkage
that can cause it not to shift right
if there is no mud interfering you my need to adjust the linkage