Missing link(double shackle)?
#1
Member
Thread Starter
Join Date: Jan 2010
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Missing link(double shackle)?
Has anyone ever ran missing links in the rear of the xj? They are double jointed shackles that allow more flex. I have a set from a old sami i used to have, the sami world uses them with sucess on thier rigs.
#5
Newbie
Join Date: Feb 2010
Location: Bowling Green, Ky
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1991
Model: Cherokee
Engine: 4.0 I-6
#7
I ran some on my sammy front and rear years ago with great success. I never had them unload on hills up or down or while driving or any of that and it was a very built rig that got some serious wheeling!. Im not sure how they would do on a XJ every rig is different. As you can see in this pic you can get some great flex with a missing link shackle..Mine are not even fully open in this pic
Trending Topics
#8
CF Veteran
if you're worried about unloading both sides, just use a limiting strap on the center of the diff. that way you still get full flex at each wheel, but only independently, just the way you want.
i've got a brand new set of terraflex revolvers in the box that i've had for a few years, i might put them in when i put my sye in, but not sure yet.
i've got a brand new set of terraflex revolvers in the box that i've had for a few years, i might put them in when i put my sye in, but not sure yet.
#9
CF Veteran
Join Date: May 2009
Location: SLC, UT
Posts: 6,328
Likes: 0
Received 1 Like
on
1 Post
Year: 1989 2 door
Model: Cherokee
Engine: 4.0
My buddy has them on his XJ with a new RC lift, but he hasn't wheeled them much yet... Although on the road the STIFF leafs shoot the back end up like a pogo stick every time he hits a bump, so he wants to make quick discos for the revolvers! That way when he's on the highway they don't open up on the bumps!!!
Thread
Thread Starter
Forum
Replies
Last Post
1998CherokeeXJ
Modified XJ Cherokee Tech
29
10-03-2015 05:14 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)