Making my own TC drop kit, need some measurements please.
#1
Junior Member
Thread Starter
Join Date: Jul 2009
Location: San Jose, CA
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
Making my own TC drop kit, need some measurements please.
OK so the title says it all.
I've decided to make mine out of 1" square tubing, the width of the cross-member is 6" but how far are the holes for the bolts from each other? I measured 4" 5/8 but I'd like someone to verify in case I had a brain fart while doing this.
Also what kind of bolts (pitch ect.) and how long do I need them to be?
I've decided to make mine out of 1" square tubing, the width of the cross-member is 6" but how far are the holes for the bolts from each other? I measured 4" 5/8 but I'd like someone to verify in case I had a brain fart while doing this.
Also what kind of bolts (pitch ect.) and how long do I need them to be?
#2
Thread
Thread Starter
Forum
Replies
Last Post
investinwaffles
Modified XJ Cherokee Tech
11
05-18-2021 12:02 PM
EBowen95
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
49
08-25-2015 08:44 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)