hello can anyone tell me how i can raise my suspension on my jeep, i want to try and keep costs low as i can but i want to lift it about 3"......

 

You can do this for under $300
http://www.roughcountry.com/jeep_xj_3.html

 

Buy some coil spacers from autozone for around $35 a set.
then build yourself a "bastard pack" out of some leafs from a chevy s10 at the junkyard. Go to your local suspension store and buy 4 U bolts, 2 leaf allignment pins, and 4 leaf clamps. The cashier shouldn't be charging you any more than $50 for the parts.

The entire lift itself shouldn't cost you more than $100. I'd say $75-$80 is about right.

 

[QUOTE=JeepingDan;781562]You can do this for under $300

cheers for that bud

 

this should probably be in tech section but watev. go to the tech thread page and look in the budget junkyard parts list. you can do it cheap with full spring lift instead of spacers.

 

True but then you'll raise the price. Also I don't reccomend throwing just any front suspension component on a vehicle. I'd get something designed for an XJ instead of swapping coils off from let's say an F150.

 

this is your best bet.

 

also where are the body bolts located and how do i get to them, and im after a set of wide bolt on arches so if some1 could help me in telling me where i can get sum and how much they are ....... cheers

 

Here is another one www.fatbobsgarage.com lots of lift ideas.
Body bolts???? for what the springs? they are at either end lol!
Good luck!

 

no lol the bolts that hold the body on i plan to lift it an inch aswel so 4 inchs altogether with the suspension lift but i cant find them and do u have to cut holes in the floor to get to them????

 

cherokees are unibody, no bolts holding frame/body together.

 

does that mean i cant do a body lift lol

 

No you can not do a body lift as the body is part of the frame.

 

You would be correct sir!

 

Theres a reason you cant find them lol