lift???
#1
Seasoned Member
Thread Starter
Join Date: Sep 2009
Location: columbus ga
Posts: 374
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Grand Cherokee
Engine: 5.2
lift???
ok so right know i have spacers and shackles. i was wondering if i could just buy a 3 inch lift to add to my already 2 inch lift and would everything work aight. its a dd so not worryed about flex or anything. also i was wondering if i could just get away with a t case drop and shims instead of doing a sye kit?
#2
Seasoned Member
Join Date: Oct 2009
Location: Gaithersburg, MD
Posts: 449
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: Inline 6
look at it this way. you've got a 2" kit already on it. and then adding a 3" Kit. 3+2=5. so with 5" of lift i dont think you will get away with a TC drop and shims. not to add you will need new shocks and a adj. trac bar because your front end will be out of wack.
#7
Senior Member
Join Date: Apr 2009
Location: Ontario
Posts: 522
Likes: 0
Received 0 Likes
on
0 Posts
Year: 98' and 99'
Model: Cherokee
Engine: 4.0
i would recommend getting the 4.5 " lift.. i run 3"skyjacker with 2"coil and spacer"(same set up you want) with adj. track bar and drop pitman arm.. the lower control arms pull to close to the back of the front fender, and the controls arm will be quite steep and a rougher ride, also ive drove it daily for over a year with no t-case drop or sye(soon) i have vibration but still no problems,,,
Trending Topics
#11
Member
Join Date: Feb 2009
Location: Grand Junction, Co
Posts: 210
Likes: 0
Received 0 Likes
on
0 Posts
Year: 99
Model: Cherokee
Engine: 4.0
you DONT need new brake lines or sye or CV driveshafts with the 4.5 inch RC lift. You dont even need a new track bar.. everything you need comes with the kit