jeep acts weird when put into 4hi
#1
Newbie
Thread Starter
Join Date: Sep 2010
Location: Newport News, VA
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0 HO
jeep acts weird when put into 4hi
well here is what is happening
whenever i put the jeep into 4hi and drive in a straight line the front end vibrates and when i stop it clunks
also when the jeep is in 4hi and i turn the whole thing goes crazy
then when i put it back into 2wd it drives and rides fine
i dont know what is wrong with it and i cant figure it out
i have tried manually putting the jeep into 4hi thinking maybe it isnt fully engaging but that didnt help...
any help would be greatly appreciated...
whenever i put the jeep into 4hi and drive in a straight line the front end vibrates and when i stop it clunks
also when the jeep is in 4hi and i turn the whole thing goes crazy
then when i put it back into 2wd it drives and rides fine
i dont know what is wrong with it and i cant figure it out
i have tried manually putting the jeep into 4hi thinking maybe it isnt fully engaging but that didnt help...
any help would be greatly appreciated...
#6
Newbie
Thread Starter
Join Date: Sep 2010
Location: Newport News, VA
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0 HO
axles are the same as when i bought it a couple months ago and i went and offroaded it with no problems, but it concerns me that in a straight line its doing it my wrangler doesnt do it in a straight line even on concrete,
i just went in some grass with it in 4hi and it drove normal but i also couldnt get any sort of speed so see if it develops..
i just went in some grass with it in 4hi and it drove normal but i also couldnt get any sort of speed so see if it develops..
Trending Topics
#10
Newbie
Thread Starter
Join Date: Sep 2010
Location: Newport News, VA
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0 HO
well i went over to a field at a local school and put it into 4hi and 4lo and drove at a moderate speed 30 in 4hi and 15 in 4lo and it drove fine with no wobble and was perfect maybe it is just the concrete?
i bought the jeep at the end of october and i havent done anything other than change fluids
i bought the jeep at the end of october and i havent done anything other than change fluids
#12
Newbie
Thread Starter
Join Date: Sep 2010
Location: Newport News, VA
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0 HO
if it was the u-joints wouldnt they act up in 2wd also?
and the trans does it in 4hi-4lo when going forward but not in reverse?
and the trans does it in 4hi-4lo when going forward but not in reverse?
#13
Member
Join Date: Dec 2010
Location: belvidere, il
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
it could cuz when 4wd is on its actually applying force on them, just crawl underthere and turn the front shaft back and forth, you should be able to see if there is play by the axle joints if they are moving up and down
Thread
Thread Starter
Forum
Replies
Last Post
zumer715
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
18
07-08-2022 05:17 PM
BayArea93xj
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
06-11-2016 10:43 AM
Ye Ol' Cherokee
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
15
09-05-2015 04:36 PM
petejeep95
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
08-22-2015 11:39 AM
schaferjeep
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
5
08-21-2015 08:40 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)