Isuzu Dana 44 internals and gears + Xj Dana 44 housing=
So I have a Dana 44 our of an xj that is just the housing. My friend has a dana 44 out of an isuzu. My question/goal is will the internals (ring and pinion) and the brakes off the isuzu fit on/in a xj dana 44?
Also I know the isuzu is a six lug is it possible use the 5 lug axle shafts out of the xj dana 44 with the carrier, ring, and pinion from the isuzu and just get a different rotor to fit the disc brakes from the isuzu.. TIA. Derek |
if they are both Dana 44's then the internals should be the same... so you need to measure the axels and spline count .... thats about all i know...
|
Originally Posted by Hommersimpson
(Post 706756)
if they are both Dana 44's then the internals should be the same... so you need to measure the axels and spline count .... thats about all i know...
If I wanted to rebuild the XJ Dana I would just buy a new R & P and a master rebuild kit, 35 spline shafts, a locker, and do it right. |
All times are GMT -5. The time now is 06:25 PM. |
© 2024 MH Sub I, LLC dba Internet Brands