3ricandsm00's_98_sp0rt

I have a rc 3'' lift, but just looking at my 235's it looks like there is no way 31x10.50's are going to fit with out trimming the front bumper caps. I am thinking about getting a 1.5'' budget to add on. Could someone give me a run down on everything I need to go 1.5'' or 2'' higher(track bar,brake lines),all the stuff to do it right.

xjoffroad

theres a "tire and lift" thread were this belongs. not trying to be rude but if you search you will find you answer. use the search button on top!

93gc40

31" will fit a 3" lift without trimming. 3" lifts are designed for 31" tires. 31" tires are only 1" bigger than a 235/75 tire

Allusion

i thought 235s were just about 29" tires.. shurgs.. i just got new 31's and they are way bigger then my 235s.. but they should fit under a 3".. im running a 4.5 and i can still go up 2 sizes with minor trimming it looks like..

93gc40

You are correct 235s are about 29", 30" are about 29.75" and 31" are about 30.5". A 31" tire is much bigger than a 235 1-1.5" in diameter and a little more than 1" in width. A 4.5" lift is designed around 32" tire and can go to 33 with very light trimming.

3ricandsm00's_98_sp0rt

Not rude at all bro. Sorry still new to the forum,I saw where I should have posted after I posted here. I'll repost there. Thank ya'll for t he responses!