Hydraulic line connection
#1
Newbie
Thread Starter
Join Date: Aug 2009
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Hydraulic line connection
My '93 XJ is a 2.5L with an AX5 trans. A while back I lost pressure in the clutch hydraulic line and found a strange sort of snap fit connector at the (external) clutch cylinder. It had failed and was loose but was very hard to remove. It was pressed into the plastic/nylon line so I assume the entire line has to be replace as a unit. Since that was not an option at the time, I cut the connector off and joined the line to the metal pipe to the cylinder with a short length of injector hose and ran a series of hose clamps along it's length to reinforce it. That was six weeks ago and although it has continued to hold pressure, I feel like I'm on borrowed time. The problem is I'm not finding this part anywhere online including local parts houses. The "engineer" who thought up this wretched little piece of crap should have it stuffed up his "poo hole" and set on fire. Can I replace this thing with a more typical line and connector without removing and dismantling the clutch cylinder and possibly the master cyl.? And if not, where can I get another oem type of part, aside from the dealership? Thanks in advance.
#3
Newbie
Thread Starter
Join Date: Aug 2009
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Thanks Troy, seems like every time I start thinking I know something about cars, it turns out that may not be the case.
"Only the mediocre can always be at their best" H.L. Mencken
"Only the mediocre can always be at their best" H.L. Mencken
#5
Seasoned Member
Join Date: Jun 2009
Location: W.V.
Posts: 336
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0 I6
#6
i have a 91 xj
same problem broken hydraulic assembly line... is this heat shrink line? can i replace cylinder/slave with aftermarket and use braided line with metal conectors? actually more confused than that now I may have an internal slave/T-O bearing type... where can i purchase this line, be it the vinyl, plastic, rubber, braided, or other??? any ideas?? thanks!!
Thread
Thread Starter
Forum
Replies
Last Post
NM-XJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
18
10-23-2018 04:21 PM
ZombieResponseJeep
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
8
09-22-2015 08:45 AM
Bankerburt
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-08-2015 10:29 PM
neocracka
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
09-05-2015 06:50 PM
Jicki Rough
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-02-2015 09:36 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)