Unibody frame damage?? Have a parts cherokee to fix it!?
#1
Newbie
Thread Starter
Join Date: Feb 2019
Location: Connecticut
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee (XJ)
Engine: 4.0
Unibody frame damage?? Have a parts cherokee to fix it!?
Hey guys I have two cherokees...
99 cherokee 2 door: Has a perfect body but has tons of frame rot underneath. Motor and everything else is solid.
00 cherokee 4 door: crashed the front end. Frame rails look intact as well as the front crash bar is nice and straight. Mostly cosmetic damage up front. Otherwise low miles frame is perfect no rust anywhere!
id like to take the front nose off the 2 door and swap it to the 4 door. The damage looks like be on the fender as well as the inner fender which is the most concerning to me since it seems to have pushed back the door and kinda separated from the frame rails. Otherwise like I said the frame rails look decent.
Im thinking of welding these pieces into it. This isn’t a daily driver (I have a 2017 JKU) this is just a hobby/project I’ve wanted to do for awhile. Let me know what you guys think or am I crazy for wanting to do this??? My family says I am! Lol
Last edited by mr.marcovasi; 02-19-2019 at 04:29 PM.
#2
Seasoned Member
Post some pictures if you can and you'll get some good opinions.
Sounds like a plan, though, and you'll probably need a few parts
from the junkyard as you go along.
Sounds like a plan, though, and you'll probably need a few parts
from the junkyard as you go along.
#3
CF Veteran
Join Date: Nov 2017
Location: Groton, MA
Posts: 3,695
Received 234 Likes
on
207 Posts
Year: 1995
Model: Cherokee(XJ)
Engine: I6 4.0L
Tell your family that it's crazier to drive a vehicle (even if it's just occasionally) with a structurally unsound frame than it is to do a little cutting and welding.
#5
Newbie
Thread Starter
Join Date: Feb 2019
Location: Connecticut
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee (XJ)
Engine: 4.0
my thoughts exactly. I don’t mind doing a little welding at all, I’m just concerned that the pass door isn’t lining up right I don’t know how to fix that
#6
Senior Member
That doesn't look like a very bad job really simple for the most part check out my build and not as bad as what I did so very doable!
#7
CF Veteran
Join Date: Nov 2017
Location: Groton, MA
Posts: 3,695
Received 234 Likes
on
207 Posts
Year: 1995
Model: Cherokee(XJ)
Engine: I6 4.0L
How's the door not lining up? Is it just a little - maybe do some cutting and grinding to get things where they need to go. If it's bent a little, maybe pull it back to the right spot with a come-along and a hefty tree and then weld in something to brace the spot where it bent (or cut it out and patch in some sounder metal.. ?
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
s14unimog
Modified XJ Cherokee Tech
10
12-09-2011 03:08 PM
rustytierod
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
04-30-2011 05:59 PM
chiefcherokee
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
03-05-2009 06:55 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)