How to paint rims?
#2
CF Veteran
Join Date: Oct 2009
Location: south jersey
Posts: 1,474
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1997
Model: Cherokee
Engine: 4.0
you best best is to scuff em up real good with a red scotch brite pad , make sure you actually sand out pits or chips with about 180-220 sand paper works best , use a nice primer and paint away , make sure you wipe them down after sanding with a nice solvent cleaner first, i would use a nice enamel paint it usually drys up pretty hard and tougher then a base coat/clear coat
Last edited by DEVILSTOY; 11-24-2009 at 01:57 PM.
#3
Junior Member
Join Date: Nov 2009
Location: Flagstaff, AZ/ Gilbet, AZ
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0
I just sanded my steel rims, then got falt black and sprayed it on nice and simple, I'll see if I can find the spray can I used but my rims turned out alright.
#5
CF Veteran
Join Date: Oct 2009
Location: south jersey
Posts: 1,474
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1997
Model: Cherokee
Engine: 4.0
o yea most important , scrub the wheels really good before you even start with soap and water using a decent detergant , this will simplify a huge headache later with fish eyes and paint lifting problems
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Stabsthedrama
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
15
10-03-2015 05:46 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)