How do I tell which rear axle I have?
#1
Newbie
Thread Starter
Join Date: Jun 2010
Location: CA
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Engine: 4.0
How do I tell which rear axle I have?
I did an 2" add a leaf lift on my 94 cherokee and I want to replace the axle U bolts.
I found this on quadratech, but it doesn't say what they are measuring:
Has anyone else figured this out before?
Thanks!
I found this on quadratech, but it doesn't say what they are measuring:
90-01 w/ Dana axle 3.18"” wide 56009 06
91-01 w/ Chrysler 8-1/4" axle 3.55"wide 52449 1062
I measured the current bolts and they are 3 1/4" center to center and 2 7/8" Inner diameter.91-01 w/ Chrysler 8-1/4" axle 3.55"wide 52449 1062
Has anyone else figured this out before?
Thanks!
#5
Seasoned Member
Join Date: Nov 2010
Location: Michigan
Posts: 475
Likes: 0
Received 2 Likes
on
1 Post
Year: 1998
Model: Cherokee
Engine: 4.0
http://www.jeep.com/wccsapp/universa...ull&category=U
If you contact Jeep at the link above and ask for a build sheet they will send a list of everything your Jeep came with from the factory. It would tell you what axles it left the factory with not really needed in this case but still cool to have.
If you contact Jeep at the link above and ask for a build sheet they will send a list of everything your Jeep came with from the factory. It would tell you what axles it left the factory with not really needed in this case but still cool to have.
#6
Newbie
Thread Starter
Join Date: Jun 2010
Location: CA
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Engine: 4.0
Trending Topics
#8
Newbie
Thread Starter
Join Date: Jun 2010
Location: CA
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Engine: 4.0
http://www.jeep.com/wccsapp/universa...ull&category=U
If you contact Jeep at the link above and ask for a build sheet they will send a list of everything your Jeep came with from the factory. It would tell you what axles it left the factory with not really needed in this case but still cool to have.
If you contact Jeep at the link above and ask for a build sheet they will send a list of everything your Jeep came with from the factory. It would tell you what axles it left the factory with not really needed in this case but still cool to have.
#12
I have the same rear axle, I knew it wasn't a Dana 35 because Dana 35 is a "rounded bottom girl" and my axle is flat like the one in the picture. The question is, is putting a lift on a Chrysler Axle worth it or should I invest in a larger axle. I would say "Thread Jacked" but it's along the same thread topic, just more about "ME!"
FYI, if you haven't changed out the rear diff fluid, I say the front axle is a lot easier to pry off than the rear axle, and sadly the rear one comes with a plastic cap not metal
FYI, if you haven't changed out the rear diff fluid, I say the front axle is a lot easier to pry off than the rear axle, and sadly the rear one comes with a plastic cap not metal
#13
Newbie
Thread Starter
Join Date: Jun 2010
Location: CA
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Engine: 4.0
http://www.jeep.com/wccsapp/universa...ull&category=U
If you contact Jeep at the link above and ask for a build sheet they will send a list of everything your Jeep came with from the factory. It would tell you what axles it left the factory with not really needed in this case but still cool to have.
If you contact Jeep at the link above and ask for a build sheet they will send a list of everything your Jeep came with from the factory. It would tell you what axles it left the factory with not really needed in this case but still cool to have.
Thank you for contacting the Jeep Customer Assistance Center, your
emails are important to us!
We are more than pleased to provide vehicle build information per your
request.
According to our records, your 1994 Jeep Cherokee was equipped from the
factory with the following:
Sales Code
Description
DJHS Dana M30/181MM
Front Axle
DMDS 3.55 Rear
Axle Ratio
DRAS Corporate 8.25
Rear Axle
emails are important to us!
We are more than pleased to provide vehicle build information per your
request.
According to our records, your 1994 Jeep Cherokee was equipped from the
factory with the following:
Sales Code
Description
DJHS Dana M30/181MM
Front Axle
DMDS 3.55 Rear
Axle Ratio
DRAS Corporate 8.25
Rear Axle
#15
CF Veteran